MACDEV DROID Owner's Manual page 7

Your Droid marker has been CNC milled from a solid billet of 6061 aircraft
grade aluminium, representing the highest quality workmanship available in
aluminium manufacturing. The milling has been performed by a 3D surfacing
machine, with each marker taking many hours to produce.
Please take the time to learn the parts of your Droid, it will help you when read-
ing this manual.
Numbered basic parts as shown in the figure on the left:
1. Matchstik 2 piece barrel
2. Feed clamp lever (used to affix your loader)
3. Feed clamp adjuster screw
4. Top locating screw (must be removed before disassembly of the drive train
5. Eye cover and screw (covering the beam sensor used to detect paintballs)
6. End cap
7. On/Off switch
8. Indicator LED
9. Wrap around grip (covering the battery and electronics)
10. Venting ASA (used to attach your preset air system)
11. Venting ASA on/off cap (used to turn the air on or off)
12. Straight push-fit hose fitting
13. Air hose
14. 90 degree swivel push-fit hose fitting
15. Velocity adjustment screw
16. Inline regulator (Gladiator reg)
17. Vertical ASA
18. Feed Tube
Contents
Know your Droid
Quick Setup
Using your Droid
Advanced Setup
Maintenance
Parts List
Troubleshooting
6