Page 1
OWNERS MANUAL f o n t : A g e n c y F B ( B o l d )
Page 2
Mac Developments Pty. Ltd. All proprietary rights and information are the sole property of Mac Developments Pty. Ltd. MacDev, Clone, Conquest, Gladiator, MatchStick, Cyborg, Shift and Drone are all trademarks of Mac Developments Pty Ltd. Statement of Liability Caution! Mac Developments Pty.
Page 3
Know your Clone (Page 5) Cycle filter Quick Setup Ball settle delay All users should read this section to learn the parts of your Clone and their names. Using your Clone Solenoid on time (dwell) Quick Setup (page 7) Advanced Setup...
Page 4
Your Clone marker represents the pinnacle of premium grade paintball markers Contents available today. Know your Clone Quick Setup Please take the time to learn the parts of your Clone, it will help you when Using your Clone Advanced Setup reading this manual. Maintenance...
The on/off button is located on a membrane pad on the rear of the frame. Push Advanced Setup The venting ASA included with your Clone uses a screw cap to turn the air from the button with the power symbol (...
Page 6
Maintenance Open clamp and All Clone markers are equipped with a cam lever clamping feed tube. This The velocity of the Clone is adjusted via an adjustment screw on the bot- Parts List push loader in system allows the easy installation and removal of your loader. You will need tom your inline regulator.
About the tourney lock press the power button. The Clone board is equipped with a tourney lock system. When the tourney lock system is activated, the gun cannot be reprogrammed on the field - When you are finished with the program mode, hold the power button until the display goes blank (marker making it tournament legal.
Page 8
(PPS). A low PPS setting will begin ramping Know your Clone HAVE SOME MODES REMOVED modes will allow you to use your Clone in many different situations - more easily than a high PPS setting. Quick Setup TO COMPLY WITH LOCAL LAWS.
Page 9
Eye function Your Clone can utilise the beam sensor (eye) in different ways. This setting can be used to select which Once the desired slot is displayed, hold the trigger again, and the software will ask you to confirm (with way you would like to have the sensor used.
- so storage of your marker is just as important as cleaning. When storing your marker, ensure that it is stored in the Clone bag that is free of dirt, otherwise dirt may get...
Page 11
Maintaining the drivetrain Contents Your drivetrain should be maintained after every 10,000 shots or so. You may Know your Clone maintain your drivetrain more frequently if you wish. Quick Setup Feed clamp Shift barrel eye cover Using your Clone assembly...
Page 12
Your inline regulator (otherwise know as Gladiator reg), regulates the pres- o-ring (015) Quick Setup sure from your air system down to the pressure used to fire your Clone. It is Using your Clone very important that your inline regulator is working well, if not, you may experi- Advanced Setup ence problems with velocity fluctuation or shootdown.
Ensure that the the case, consult your loader manual to Clone will not turn on positive (+) terminal is connected to the reduce the force setting. positive terminal on your battery.
Page 14
Physical Length 216mm (524mm with barrel) If you require technical assistance, please contact your local MacDev service centre. You can also find as- Width 35mm sistance on the MacDev main website www.macdev.net, simply follow the prompts to the support page.
Page 15
(c) Copyright 2008-2009 Mac Developments Pty Ltd (MacDev). MacDev - Proudly Australian The Clone paintball marker is covered by the following granted patents as well as international pending patents: U.S. Patent Nos. 5,228,427; 5,755,213; 5,957,119; 6,260,821; 6,349,711; 6,494,195; 6,644,295; 6,644,296; 6,823,857; 6,694,963; 6,810,871; 7,017,497; 7,044,119.
Need help?
Do you have a question about the CLONE and is the answer not in the manual?
Questions and answers