Maintenance - MACDEV CLONE Owner's Manual

Using an RF transmitter
Your stock board has provision for an RF transmitter attachment. To use the RF transmitter function, you
must plug a compatible RF transmitter module into the RF transmitter plug (directly under the eye plugs on
your board), and it will be activated automatically.
Using the USB connector
Your stock board has a mini USB connector on the bottom of the board to the right of the 9V battery. The
USB connectivity may be used to update your software via a standard USB/mini USB cable.
Never operate the USB connection while the board is powered on. Never update your board with soft-
ware unless it has been downloaded directly from the MacDev website (www.macdev.net), the use of
non genuine software on your stock board will immediately void your entire marker warranty.

MAINTENANCE

If you take 10 minutes after every day of play to maintain your marker, you will
be rewarded with consistent reliable performance.
You should perform basic cleaning after every day of play, and you should
perform drivetrain and inline regulator maintenance after at least every 2 days
of play. You can clean and maintain your Clone more often, it is up to you.
When maintaining your Clone, use only MacDev accessories. Your Clone is
packaged with an allen key set and a small tub of MacDev Militia Lube, only use Militia Lube to lubricate
your Clone.
Basic cleaning
After using your Clone, always clean old paint from the outside. Always clean your barrel using a barrel
swab to remove traces of dirt and paint. Use your barrel swab to clean the breech and feed tube in a
similar way.
Your Clone internal parts are quite well protected and sealed. However, when not in use, dirt can get
into the marker and cause problems - so storage of your marker is just as important as cleaning. When
storing your marker, ensure that it is stored in the Clone bag that is free of dirt, otherwise dirt may get
into the venting ASA or breech.
Contents
Know your Clone
Quick Setup
Using your Clone
Advanced Setup
Maintenance
Parts List
Troubleshooting
18