Connection Details; Advanced Configuration; Static Ip Address Configuration - Cognivue Thrive User Manual

Cognivue Thrive® User Manual

Connection Details

When logged on to a Cognivue Thrive® device, administrators can view and test the current network
configuration information on the Network Configuration window.
Network Configuration window
To open the Network Configuration window, on the Primary window (see 5.0 Logging on to Cognivue
Thrive®) select Device Administration >> Settings and then click the Network tab. The Network
Configuration window contains network configuration properties and their values, as well as
instructions for setting up a basic connection as described above. To ensure the displayed connection
property values are current, click the Refresh button. If all the property values are blank, the device is
not connected and you will need to follow the instructions to establish a connection. Once there are
property values displayed, you can use the Test Connection button to confirm that the device has
network connectivity and is able to connect to the Cognivue back-end systems.

Advanced Configuration

When more advanced network configuration is required, an administrator can log on to the Cognivue
Thrive® device and open the Network Configuration window as described above. Generally this more
advanced configuration will be done duing a consultation with a network administrator and/or Cognivue
Support staff; however, one of the more common advanced configurations is described in the following
subsection.

Static IP Address Configuration

Click the Advanced Configuration button on the Network Configuration window.
© 2021 Cognivue, Inc. UM-420-J Page 8