Basic Wired Connection - Cognivue Thrive User Manual

Cognivue Thrive® User Manual
Upon selecting a network, you will be prompted to enter the Wi-Fi password for the selected network.
Wi-Fi Authentication dialog
Upon entering a correct password and clicking the Connect button, the Cognivue Thrive® device will be
connected. Note that the icon in the top left has now changed to the Wi-Fi connection strength icon
indicating network connectivity.
Wi-Fi Connection Strength icon
The first time the device is connected to any network, it will be necessary to follow this procedure to
select the network and enter the credentials for that network. Once connected to a network, the device
will remember the credentials so that when moving from one previously-connected network to another,
it will be necessary to simply click the Network icon and select the desired network.

Basic Wired Connection

To establish a wired connection to a network, connect one end of a standard network cable to an active
network jack at your location and the other end into the RJ-45 network port on the back of the Cognivue
Thrive® device. Follow the same instructions as above, but this time select Wired Connection 1. The
icon in the top, left corner will now be the Network icon.
© 2021 Cognivue, Inc. UM-420-J Page 7