General Setup; Paper Settings; Paper Type; Paper Size - Brother DCP-8065DN User Manual

3

General setup

Paper settings

Paper Type

Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Choose one of the options below:
To set the paper type for the MP
Tray press Menu, 1, 1, 1.
To set the paper type for Tray#1
press Menu, 1, 1, 2.
To set the paper type for Tray#2
press Menu, 1, 1, 3 if you installed
the optional tray.
11.Paper Type
1.MP Tray
a Plain
b Thick
Select ab & OK
b
Press a or b to select Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper. Press OK.
c
Press Stop/Exit.
Note
• Transparency is not available for the
optional Tray #2.
• You can choose Transparency only if
A4, Letter, Legal or Folio size was
chosen as the paper size.

Paper Size

3
You can use nine sizes of paper for printing
copies: A4, Letter, Legal, Executive, A5, A6,
3
B5, B6 and Folio (8"×13").
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document on the page.
a
Choose one of the options below:
To set the paper size for the MP
Tray press Menu, 1, 2, 1.
To set the paper size for Tray#1
press Menu, 1, 2, 2.
To set the paper size for Tray#2
press Menu, 1, 2, 3 if you installed
the optional tray.
12.Paper Size
1.MP Tray
a Letter
b Legal
Select ab
b
Press a or b to select A4, Letter,
Legal, Executive, A5, A6, B5, B6,
Folio or Any.
Press OK.
c
Press Stop/Exit.
Note
• Any (size) appears only when you select
the MP tray (Menu, 1, 2, 1).
• If you select Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.
• A6 size is not available for the optional
Tray #2.
& OK
3
3
3
17