Brother DCP-8065DN User Manual page 73

Error Message Cause
The paper is jammed in the paper
Paper Jam
tray of the machine.
Tray1
Paper Jam
Tray2
It is time to replace the fuser unit.
Replace Fuser
It is time to replace the laser unit.
Replace Laser
It is time to replace the paper
Replace PF
feeding kit for Tray 1.
Kit1
It is time to replace the paper
Replace PF
feeding kit for Tray 2.
Kit2
It is time to replace the paper
Replace PF
feeding kit for the MP tray.
KitMP
The scanner lock is locked.
Scanner
Locked
The toner cartridge and drum unit
Toner Error
assembly is not installed properly.
The toner cartridge and drum unit
Toner Life
assembly is not installed properly,
End
or the toner cartridge is used up
and printing is not possible.
If the LCD shows Toner Low, you
Toner Low
can still print; however, the
machine is telling you that the toner
cartridge is near the end of its life
and the toner will soon run out.
More than one optional tray is
Too Many
installed.
Trays
The machine has a mechanical
Unable to
problem.
Init.
(Initialize)
Unable to
Print
The machine has a mechanical
Unable to
problem.
Scan
Document is too long for duplex
scanning.
Troubleshooting and routine maintenance
Action
(See Paper jams on page 63.)
Call Brother Customer Service to replace the
fuser unit.
Call Brother Customer Service to replace the
laser unit.
Call Brother Customer Service to replace the
PF Kit 1.
Call Brother Customer Service to replace the
PF Kit 2.
Call Brother Customer Service to replace the
PF Kit MP.
Open the document cover, then release the
scanner lock lever, and press Stop/Exit.
Reinstall the toner cartridge.
Do one of the following:
Re-install the toner cartridge and drum unit
assembly.
Replace the toner cartridge with a new one.
(See Replacing the toner cartridge (TN-
550/TN-580) on page 73.)
Order a new toner cartridge now.
The maximum number of optional trays is one.
Remove any additional trays.
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes before
you try to print, copy or scan again.
Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes and then
try it again.
Press Stop/Exit. Use a suitable size of paper for
duplex scanning. See Scan on page 94.
61