Troubleshooting And Routine Maintenance Troubleshooting; If You Are Having Difficulty With Your Machine; Troubleshooting And Routine Maintenance - Brother DCP-8065DN User Manual

Multifunction center/facsimile machine
Hide thumbs Also See for DCP-8065DN:
Table of Contents

Advertisement

Troubleshooting and routine
C
maintenance
Troubleshooting
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be
made from within that country.

If you are having difficulty with your machine

If you think there is a problem with the way your faxes look, make a copy first. If the copy looks
good, the problem is probably not your machine. Check the chart below and follow the
troubleshooting tips. You can solve most problems by yourself.
If you need additional help, the Brother Solutions Center offers the latest FAQs and
troubleshooting tips.
Visit us at http://solutions.brother.com.
Copy Quality Difficulties
Difficulties
Vertical streaks appear in copies.
Printing Difficulties
Difficulties
Poor print quality
Vertical black lines on copies or
printouts
No printout.
Suggestions
Either the scanner or the primary corona wire for printing is dirty. Clean them both.
(See Cleaning the scanner glass on page 69 and Cleaning the corona wire on
page 71.)
Suggestions
See Improving the print quality on page 55.
Your machine's primary corona wire for printing may be dirty. Clean your primary
corona wire. (See Cleaning the corona wire on page 71.)
If the problem continues, call Brother Customer Service at 1-800-284-4329 (in
USA) or 1-877-BROTHER (in Canada).
Check that the machine is plugged in and the power switch is turned on.
Check that the toner cartridge and drum unit are installed properly. (See
Replacing the drum unit (DR-520) on page 76.)
Check the interface cable connection on both the machine and your computer.
(See the Quick Setup Guide.)
Check that the correct printer driver has been installed and chosen.
Check to see if the LCD is showing an error message. (See Error messages
on page 59.)
The machine is online. On your PC, click Start, then Settings, and then
Printers and Faxes. Right-click 'Brother DCP-XXXX (where XXXX is your
model name)'. Make sure that 'Use Printer Offline' is unchecked.
C
C
C
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp-8060

Table of Contents