Phoenix Service Sw; Before Installation - Nokia RM-94 Service Software And Tuning Instructions

Hide thumbs Also See for RM-94:

Table of Contents

RM-94

3 - Service Software and Tuning Instructions

Phoenix Service SW

• Check that a dongle is attached to the parallel port of your computer .

• Download the installation package (e.g. phoenix_service_sw_

to your computer (e.g. C:\TEMP).

• Close all other programs.

• Run the application file (e.g. phoenix_service_sw_

instructions on the screen.

Administrator rights may be required to be able to install Phoenix depending on the Operating

System

If uninstalling or rebooting is needed at any point, you will be prompted by the Install Shield pro-

gram.

If at any point during installation you get this message, the dongle is not found and installation

cannot continue.

Possible reasons may be defective or too old PKD-1Dongle (five digit serial number dongle

when used with FPS-8 Prommer) or that the FLS-4S POS Flash Dongle is defective or power

to it is not supplied by external charger.

First, check the COM /parallel ports used! After correcting the problem, the installation can be

restarted.

Issue 1 04/2005

COMPANY CONFIDENTIAL

Nokia Customer Care

2004_46_4_75

.exe) and follow

2004_46_4_75

.exe)

Table of Contents