Removing the palm-rest and antenna
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the
memory
modules.
4. Remove the
wireless
card.
5. Remove the
power-adapter
6. Remove the
I/O
board.
7. Remove the fan.
8. Remove the
solid-state
drive.
9. Remove the
coin-cell
battery.
10. Remove the
hard
drive.
11. Remove the
touch
pad.
12. Remove the speakers.
13. Remove the
display
assembly.
14. Remove the
system
board.
15. Remove the keyboard.
16. Remove the
power button with fingerprint
Procedure
After performing the steps in prerequisites, we are left with the palm rest.
84
Removing the palm-rest and antenna assembly
computer. After working inside your computer, follow the instructions in
port.
reader.
40
assembly
After
www.dell.com/