NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1. Disconnect the fan cable from the system board.
2. Remove the two screws (M2x3) that secure the fan to the palm-rest assembly.
3. Lift the fan off the palm-rest assembly.
computer. After working inside your computer, follow the instructions in
Removing the fan
Removing the fan
18
After
www.dell.com/
39