Chapter 14: Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Inspiron 7590 2in1 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

Remove the base cover.

Procedure

1. Remove the two screws (M2.5x4) that secure the left display hinge to the system board.
2. Lift the left display hinge from the system board.
3. Disconnect the power-adapter port cable from the system board.
4. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
5. Lift the power-adapter port, along with its cable, off the palm-rest assembly.
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
Removing the power-adapter port
14
After
www.dell.com/
33