Replacing the power button with fingerprint
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1. Place the fingerprint-reader cable on the keyboard bracket.
2. Adhere the fingerprint-reader cable to the keyboard bracket.
3. Slide and insert the power button with fingerprint-reader cable on the slot on the keyboard bracket.
4. Follow the procedure from step 3 to step 8 in
Post-requisites
1. Replace the
system
board.
2. Replace the
I/O
board.
3. Replace the
display
assembly.
82
Replacing the power button with fingerprint reader
computer. After working inside your computer, follow the instructions in
"Replacing the
keyboard".
39
reader
After
www.dell.com/