Changing Lcd Language; Document Jam (Dcp-540Cn Only) - Brother DCP-540CN User Manual

Changing LCD language

You can change the LCD language.
a
Press Menu
b
Press a or b to select
Initial Setup.
Press OK.
c
Press a or b to select
Local Language.
Press OK.
d
Press a or b to select your language.
Press OK.
e
Press Stop/Exit.
Document jam (DCP-540CN
only)
Documents can jam if they are not inserted or
fed properly, or if they are too long. Follow the
steps below to clear a document jam.
Document is jammed in the top of the
ADF unit
a
Take out any paper from the ADF that is
not jammed.
b
Open the ADF cover.
c
Pull the jammed document out to the
right or left.
68
d
Close the ADF cover.
B
e
Press Stop/Exit.
Note
To avoid future document jams close the
ADF cover properly by pushing it gently in
the middle.
Document is jammed inside the ADF
unit
a
Take out any paper from the ADF that is
not jammed.
b
Lift the document cover.
c
Pull the jammed document out to the
left.
B
B
d
Close the document cover.
e
Press Stop/Exit.
B