Brother DCP-540CN User Manual page 75

Error Message
No Paper Fed
Out of Memory
Paper Jam
Unable to Change XX
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
Wrong Paper Size
Wrong USB device
Cause
The machine is out of paper or
paper is not properly loaded in
the paper tray.
The paper is jammed in the
machine.
The machine's memory is full.
Paper is jammed in the machine. (See Printer jam or paper jam on page 69.)
The machine has a mechanical
problem.
Paper is not the correct size.
A non-PictBridge compatible or
broken device has been
connected to the PictBridge port.
Troubleshooting and Routine Maintenance
Action
Do one of the following:
Refill the paper in the paper tray, and
then press Mono Start or Colour
Start.
Remove the paper and load it again
and then press Mono Start or Colour
Start.
See Printer jam or paper jam on page 69.
Copy operation in progress
Press Stop/Exit and wait until the other
operations in progress finish and then try
again.
Printing operation in progress
Reduce print resolution. (For details, see
®
Printing for Windows
Faxing for Macintosh
User's Guide on the CD-ROM.)
Disconnect the machine from the power for
several minutes, then reconnect it.
Load the correct size of paper (Letter,
Legal or A4), and then press Mono Start
or Colour Start.
Unplug the device from the PictBridge port,
then press On/Off to turn the machine off
and then on again.
or Printing and
®
in the Software
67