Lcd Display; Changing Lcd Language; Setting The Dim Timer For The Backlight - Brother DCP-J125 User Manual

Chapter 1

LCD display

Changing LCD language

You can change the LCD language.
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose
Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
Setting the Dim Timer for the
backlight
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Dim Timer.
e
Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f
Press Stop/Exit.
2
1
1
1