Auto Dial Transfer - Nortel M2016S User Manual

If the transferred call is not answered, your set rings:
†
If the person to whom you are transferring the call answers while you are
on the line, a conference call is set up among the three parties. Replace
the handset or press
system administrator about the length of your recall timer.

Auto Dial Transfer

Auto Dial Transfer enables you to use your
digits to the central office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call with a CO that offers Centrex-
or exchange line-type features.
To use Auto Dial Transfer when you pick up an incoming trunk call:
Trunk Switchook Flash
ç
1. Lift the handset or press a DN key. You
are connected to the original caller. The
extension to which you transferred the
call continues to ring.
2. Press
(to a different DN), if desired.
Release to complete the transfer. Check with your
1. Press
wait for interrupted dial tone.
2. Press
number.
3. Replace the handset or press
to end the call.
Transfer and repeat the transfer
Auto Dial key to transmit
Trunk Switchhook Flash
Auto Dial to call the desired
During a call
and
Release
51