5831 Series Low Energy Operator
Kits
5831AUxNPB Push Side
Operator
Push Side Mounting Parallel Arm
5831AUxNPB Push Side with ADA1015T/24V Hardwire Kit
5831AUXNPB with ADA1021 Pull Side Conversion Kit
Narrow Style Push
Buttons With Wireless
(RF) Transmitters
1015P Hardwire Kit:
24VDC
Transformer
OR
Compliance to AS1428.1
Where used in applications specifically intended to meet
the requirements of AS1428 .1, it is recommended that
these steps are followed:
1) A constant power supply must be used
(1015T/24V Hardwire Kit)
2) The operator shall be adjusted to remain fully
open for not less that 5s and to a maximum of
30s . In situations where this is not ascertainable,
the Executive Mode should be enabled .
3) Positioning of the Push Buttons or WTO Switches
is in accordance with the standard .
Lockwood Product Catalogue | 5831 Series Low Energy Operator
1300 LOCK UP (1300 562 587) lockweb.com.au
13