Maintenance Fundamentals - Honda Interceptor 2014 Owner's Manual

Maintenance Fundamentals

Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire,
can be a major inconvenience.
Check the following items before you get on
your motorcycle:
●
Tire tread wear and air pressures are within
limits. P. 61
2
●
Lights, horn, and turn signals operate
normally.
●
Check the condition of the drive chain. Adjust
slack and lubricate as needed.
Check the following items if you are carrying a
passenger or cargo:
●
Combined weight is within load limits.
P. 141
2
●
Cargo is secured properly.
●
Check the following items after you get on your
motorcycle:
●
●
●
●
Check the following items at regular intervals:
●
P. 84
●
2
●
●
Suspention spring preload and dumper
setting are adjusted to suit load.
Throttle action moves smoothly without
binding. P. 87
2
Brake lever and pedal operate normally.
Refuel the remaining fuel and refuel when
needed. P. 13, 41
2
Engine stop switch functions properly.
P. 34
2
Oil level is between the upper and lower
marks. P. 73
2
Brake fluid level is
Front:above the LOWER mark.
Rear:between the UPPER and LOWER level
marks. P. 80
2
Engine coolant level is between the UPPER
and LOWER marks.
2
Side stand functions properly.
P. 89
2
P. 78
P. 40, 83
2
51