Removing & Installing Body Components
Battery
Rubber strap
Negative terminal
❙
Removal
Make sure the ignition switch is off.
1. Remove the battery cover.
2. Unhook the rubber strap.
72
u
Battery
Positive terminal
Battery
P. 71
2
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
Readjust the clock after the battery is
reconnected since the clock goes wrong
once the battery disconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
terminal from
-
terminal from
+
+
P. 54
2
P. 110
2