Notes For Installation; Electric Wiring - Gree GJC9AG-E6RNB3A Operating Manual

Note:
Drain hose or tubing can be purchased locally to satisfy your particular needs.

Notes for installation

Remove
Before removing air conditioner to the other place, you should
contact the seller firstly.
Then it must be done under the direction of the professional
technician. In addition, the charge of this must be paid.
Noise
Install in a location where is firm enough to avoid the enlargement of noise
and vibration.
Don't put anything in front of the outlet of outdoor unit to avoid increasing
noise.
Be sure that hot air o r noise will not inconvenience neighbors.
Please contact the seller as soon as there is strange noise during operation.
Please use the safety support.

Electric wiring

Must connect with ground reliably.
The exclusive circuit must be used. But removable socket can' t be used because poor
contact of it can cause over heat or fire.
Don't pull the power cord strongly .
In fixed circuit, there must be electricity leakage protection switch and leakage current
is less than 30mA.
Air switch (thermal-magnetic breaker) should be installed in the circuit and its capacity
is
10A
The cross section area for fixed wiring should be more than 1.5mm 2 .
If the supply cord is damaged, It must be replaced by the manufacturer or its service agent or similarly
qualified person in order to avoid a hazard .
The appliance must be positioned so that the plug is accessible.
The appliance should be installed in accordance with national wiring regulations.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
.
6