Advertisement
Available languages
Available languages
Please make sure to read the enclosed Ninja® Owner's Guide prior to using your unit.
BLENDER PROFESSIONAL PLUS KITCHEN SYSTEM
QUICK ASSEMBLY
SINGLE-SERVE CUP
SINGLE-SERVE CUP
1.
Fill Single-Serve Cup
with desired contents.
2.
Screw on Pro Extractor
Blades Assembly
clockwise until you
have a tight seal.
1.
2.
Select
When blending is
any of the
complete, turn cup
illuminated
counterclockwise
programs
and lift to remove.
to begin
blending.
Once the Single-Serve Cup is locked onto base, press the Power button
The compatible program buttons will illuminate.
WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
PARTS
PRO EXTRACTOR
SPOUT LID
BLADES™ ASSEMBLY
ASSEMBLY
3.
Flip cup
upside down
and lower
it onto base.
BLEND & ENJOY
3.
Turn blade
assembly
counterclockwise
to remove.
to turn the unit on.
TOTAL CRUSHING® PITCHER
TOTAL CRUSHING
PITCHER
1.
Place the Total
Crushing Pitcher
on base and turn
clockwise to lock
in place.
4.
Turn cup
clockwise to
lock in place.
3a.
To pour out thinner
mixtures, ensure
4.
lid is locked in
Place Spout
place, then open
Lid on top of
pour spout.
cup and turn
clockwise to
lock in place.
NOTE: The pitcher lid handle will not fold down unless it is attached to the pitcher.
Once the Total Crushing Pitcher is locked onto base, press the Power button
WARNING: Stacked Blade Assembly is sharp and not locked in place. Make sure lid is locked onto
pitcher before pouring contents. If pouring without lid, carefully remove blade assembly first. Failure
to do so will result in a risk of laceration. Refer to the Ninja Owner's Guide for additional information.
PARTS
STACKED BLADE
PITCHER LID
ASSEMBLY
2.
Holding Stacked
Blade Assembly by
the top of the shaft,
insert it into pitcher.
BLEND & ENJOY
1.
Select any of
the illuminated
programs to begin.
The compatible program buttons will illuminate.
ASSEMBLY
3.
Align arrows on
pitcher lid and
handle, then lower
handle to lock in
place.
2.
When blending is
complete, turn pitcher
counterclockwise and lift
to remove.
3b.
For thicker mixtures, press
RELEASE button and lift
handle to remove lid, then
carefully lift out blade
assembly before pouring.
to turn the unit on.
Advertisement
