第二章:产品部件名称 第二章:产品部件名称 中 文 注意:产品图片请以包装内 实 物 为 准! (H5 没 有 冷 杯 组件 ) 部件名称 A 投料盖 B 热杯杯盖 C 热杯杯盖密封圈 D 不锈钢搅拌杯(热杯) E 主体 F 冷杯杯盖 G 冷杯杯盖密封圈 H 玻璃搅拌杯(冷杯) 量杯 J 搅拌棒(刮刀) K 清洁刷 以黄豆为例的 1 平杯...
第四章:操作使用方法 第四章:操作使用方法 中 文 不锈钢搅拌杯(热杯)安装说明 玻璃搅拌杯(冷杯)安装说明 将投料盖安装在杯盖上并旋紧,组成热杯杯盖组件。 将投料盖安装到杯盖上,组成冷杯杯盖组件。 ② ① 2 将杯盖组件安装到已装好食材的杯体组件上并旋紧,组成不锈钢搅拌杯组件。 2 将冷杯杯盖组件安装到已装好食材的杯体组件上并旋紧,组成玻璃冷杯搅拌杯组件。 ① ② ① ② 3 将不锈钢搅拌杯组件安装在主机上。 3 将玻璃冷杯搅拌杯组件安装到主机上。 www.ninja.com.cn 下厂文件 V1-190103...
Page 17
Congratulations on your purchase of this equipment. Please Chapter II: Product Components ………………………………… 7 use this manual to learn about your Ninja blender’s powerful functions. Find out anything about this powerful machine Chapter III: Operation Interface and Functions ……………… 9 from assembly to how to use to maintenance.
Please do not use Figure 1 any non-matching parts in order not to affect product performance or cause ac- cident. Cold Drinks Upper Limit Hot Drinks Upper Limit Keep this Operation Manual safely www.ninja.com.cn 下厂文件 V1-190103...
Page 19
Figure 2 Figure 3 and cleaning the parts to avoid cut (Wear The machine will produce a certain level protective gloves). of mechanical noise when stirring at high speed, sorry for the disturbance. Keep this Operation Manual safely www.ninja.com.cn 下厂文件 V1-190103...
Objects in the package shall pre- Components Name: vail. (No cold cup assem- bly for H5) Feed Cover Hot Cup Lid Hot Cup Seal Ring Stainless Steel Blending Cup (Hot Cup) Main Unit...
Indicating the current program remaining time; in 1200mL and no less Crucian Indicating the machine is timer mode, time is indicated by minutes; in other than 750mL; Carp Soup, modes, time is indicated by seconds. crushing food etc. www.ninja.com.cn 下厂文件 V1-190103...
1 minute, crush hard each press is to add DRESSING √ √ • Recommended in- food ingre- 10 seconds; hold the gredients amount is dients button to add time 500g when making continuously; cycle sauce. is adjustable. www.ninja.com.cn 下厂文件 V1-190103...
Page 23
To start a function or • START/STOP: to stop the start a function or START/STOP √ √ one that stop the one that is is working working now. now; www.ninja.com.cn 下厂文件 V1-190103...
① ② ① ② Install the stainless steel blending cup assembly on the main unit; Install the glass cold blending cup assembly on the main unit; www.ninja.com.cn 下厂文件 V1-190103...
5 "di" tones to remind the food is ready; wait until the blades stop completely, Select corresponding functions via touch buttons or the rotate the assembly to take out the blending cup and pour the food out. switch, such as SOY MILK; 预约 调速 TIMER SPEED 调温 调时 TEMP TIME www.ninja.com.cn 下厂文件 V1-190103...
80℃ . Note: The setting returns back to the initial temperature of 40℃ when the increment reaches 100℃ . Press the START/STOP button, the machine starts working. 启动/取消 START/STOP 预约 调速 TIMER SPEED 调温 调时 TEMP TIME www.ninja.com.cn 下厂文件 V1-190103...
30 seconds. Note: The setting returns back to the initial time of 0:00 when the increment reaches 6:00 minutes. Press the START/STOP button, the machine starts working. 启动/取消 预约 调速 START/STOP TIMER SPEED 调温 调时 TEMP TIME www.ninja.com.cn 下厂文件 V1-190103...
Figure 5 tons simultaneously until the machine prompts a “Di” tone and the screen indicates “Lhb”, the machine is set for use in low altitude areas. No Soaking No Rinsing LOW ALTITUDE Figure 6 Figure 7 Figure 8 www.ninja.com.cn 下厂文件 V1-190103...
4. Send it to the local after-ser- The food be- right amount 2. Too many ingredients vice office for maintenance comes sticky 3. Select the right function ac- 3. Wrong function button is cording to the recipe or the selected Operation Manual www.ninja.com.cn 下厂文件 V1-190103...
Page 30
E22 warning Motor shaft lock protection to the recipe or the Opera- tion Manual • If the machine does not work properly, send it to the local after-service office for main- tenance www.ninja.com.cn 下厂文件 V1-190103...
Chapter VII: Product Basic Information and Packing List Chapter VIII: Electrical Schematic Diagram Standards GB 4706.1-2005 GB 4706.19-2008 GB 4706.30-2008 Dimension 239mm×252mm×494mm Net weight Around 5.5kg (H5) Net weight Around 8.0kg (H6) Rated Voltage 220V Control Panel Rated Power 50Hz...
Need help?
Do you have a question about the H5 and is the answer not in the manual?
Questions and answers