Set The Devicenet Node Address And Baud Rate - Allen-Bradley 1788-EN2DNR User Manual

Chapter 4 Configure the Linking Device
46

Set the DeviceNet Node Address and Baud Rate

To be able to set the node address and the baud rate from RSNetWorx for
DeviceNet software, the rotary switches must be set to any value other than
0...63.
1. In RSNetWorx for DeviceNet software, choose Tools > Node
Commissioning.
The Node Commissioning dialog box appears.
2. On the Node Commissioning dialog box, click Browse.
The Device Selection dialog box appears.
3. In the left pane, click the + next to the RSLinx driver for the linking
device.
Rockwell Automation Publication 1788-UM059B-EN-P - September 2015