Mounting the 1788-EN2DNR
Linking Device
Mounting the
1788-EN2DNROM Linking
Device
The 1788-EN2DNR linking device can be mounted to a DIN rail.
Two mounting holes are used to mount the 1788-EN2DNROM linking device
directly to a panel or machine. The mounting holes accommodate #8 (M4) pan
head screws. The torque specification is 1.13 Nm (10 in-lb).
17
28
43,3
47,9
Rockwell Automation Publication 1788-UM059B-EN-P - September 2015
Linking Device Overview
Mounting Hole
Functional Earth (FE)
Mounting Hole
Chapter 1
200
194,8
5,2
0
13