Blodgett KLT-100E Specifications page 2

KLT-E TRI-LEG TILTING KETTLE
MODEL A B
KLT-20E 21[533] 18[457]
KLT-30E 24[610] 20[508]
KLT-40E 26[660] 22.5[572]
KLT-60E 29.5[749] 26[660]
KLT-80E 33[838] 28[711]
KLT-100E 35.5[902] 29.75[755] 48.75[1238] 49.5[1257] 22.25[565]
SHORT FORM SPECIFICATIONS
Provide Blodgett model KLT-20E (20 gallon), KLT-30E (30 gallon), KLT-40E (40 gallon), KLT-60E (60 gallon), KLT-80E (80 gallon) or KLT-100E (100 gallon) electrically heated tilting ket-
tle on legs. The unit shall have a double wall interior to form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed.
The bottom of the kettle shall be of hemispherical design for superior heat circulation. The console shall be drip proof, stainless steel clad and shall be supported on all welded, 1-5/8"
(42mm) diameter stainless steel frame and legs fitted with 4 hole adjustable flanged feet for securing to floor. The unit shall pivot on trunions connected to the tilt mechanism and the out-
bore bearing connected to the frame and shall permit the kettle to tilt forward a full 90° for complete emptying. The tilt mechanism shall be self locking for positive stop action. Construction
shall be of all welded satin finish 304 stainless steel. The controls shall be integrally mounted and shall include a power switch, thermostat with range of 165-285°F (74-140°C), a cook
indicator light, pressure gauge, safety valve, low water light and low water shut off. The elements shall be removable. Unit shall be ASME code stamped and National Board registered.
Provide options and accessories as indicated.
AVAILABLE kW
MODEL STD OPT
KLT-20E 12 N/A
KLT-30E 15 N/A
KLT-40E 18 24
KLT-60E 18 24, 33
KLT-80E 18 24, 33
KLT-100E 24 33
NOTE: The company reserves the right to make substitutions of components without prior notice.
www.blodgett.com 44 Lakeside Avenue, Burlington, VT 05401 Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Printed in U.S.A.
C D E
38[965] 36[914] 15[381]
38[965] 39[990] 16.5[419]
38[965] 41[1041] 17.5[445]
42[1067] 44.5[1130] 19.13[486]
45[1143] 48[1219] 20.88[530]
AMPS PER LINE
KW PHASE 208V 220V
1 57.7 54.4
12
3 33.3 31.5
1 72.1 68.2
15
3 41.6 39.4
18 3 50.0 47.2
24 3 66.6 63.0
33 3 91.6 86.6
NOTE: FOR COMMERCIAL USE ONLY
F G H
18[457] 14[356] 19.25[489] 14.75[375] 15.5[394]
19[483] 12.38[314] 19.25[489] 16.75[425] 17.25[438]
23[584] 10254] 20.25[514] 17.5[445]
24[610] 11[280] 22.25[565] 19.5[495] 20.75[527]
27[686] 12.6[321] 23.75[603] 20.25[514] 21.25[540]
32[813] 14.5[368] 25.25[641] 20.25[514] 21.25[540] 18.75[476] 18.25[464]
240V 380V 415V 480V
50.0 N/A N/A N/A
28.9 18.2 16.7 14.4
62.5 N/A N/A N/A
36.1 22.8 20.9 18.0
43.3 27.3 25.0 21.7
57.7 36.5 33.4 28.9
79.4 50.1 45.9 39.7
BLODGETT
APPROVAL/STAMP
J (2") J (3") K (2")
18[457] 17.5[445]
16[406] 15.5[394]
18.5[470] 13.5[343] 13[330]
14[356] 13.5[343]
15[381] 14.5[368]
POWER CONNECTION:
Refer to data plate.
600V
N/A MAXIMUM PRESSURE:
11.6
All models
N/A
SHIPPING INFORMATION:
14.5
Approx. Weight:
21.7
KLT-20E
23.1
KLT-30E
31.8
KLT-40E
KLT-60E
KLT-80E
KLT-100E
K (3") L M
- 63.5[1613]
- 66.5[1689]
- 68.5[1740]
10.5[267] 76[1930]
12[305] 82.5[2096]
14[356] 88.5[2248]
50 PSI (345 kPa)
350 lbs. (159 kg)
365 lbs. (166 kg)
400 lbs. (181 kg)
465 lbs. (211 kg)
570 lbs. (259 kg)
680 lbs. (308 kg)
P/N S00015 Rev E (12/06)