Explaining Signal Words And Safety Alert Symbols - Bosch Rexroth NYCe 4000 Instructions Manual

NYCe 4000 Multi-axis motion control
system
Fig. 3-1: Safety instruction lay-out

3.2 Explaining signal words and safety alert symbols

The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and if necessary, a safety alert symbol
(according to ANSI Z535.6-2011).
The signal word is meant to draw the reader's attention to the safety instruction
and signifies the degree of danger. The safety alert symbol (a triangle with an
exclamation point), which precedes the signal words "danger", "warning" and
"caution" is used to alert the reader to personal injury hazards.
DANGER
WARNING
CAUTION
NOTICE
In case of non-compliance with this safety
instruction, death or serious injury will occur.
In case of non-compliance with this safety
instruction, death or serious injury can occur.
In case of non-compliance with this safety
instruction, minor or moderate injury could
occur.
In case of non-compliance with this safety
instruction, property damage could occur.
R911337375_Edition 06 Bosch Rexroth AG
Using the Safety Instructions
5/19