5
1.3 CAUTION
• Discharging
Before starting the diagnosis, wait for three minutes until the electricity of the unit is discharged.
• Ground Points
Please refer to "Ground Points".
1.4 NOTES ON ASSEMBLING
Note : The right and left positions for the attachment positioning of digital amplifier block are gradual, however, adjust the
front and back positions correctly. For the positioning procedure, refer to "7. DISASSEMBLY".
When assembling the digital amplifier block, please note the following points of screws to prevent from short-circuit.
The following 7 points of screws must always be used AMZ30P060FTC
IR BUFFER_S ASSY
Points to be watched for swarf
Accessory of Panel Base
If a screw at any of these points needs to be removed for service,
be sure to check that the swarf is not on the screw before refastening.
5
6
Rear Panel
SC-82
6
7
Cover /IR
BUFFER GND ASSY
D AMP_SS ASSY
• Front View
7
8
A
B
C
D
E
F
5
8