Troubleshooting - Blodgett BLT-30G Installation Operation & Maintenance

6.0 TROUBLESHOOTING

PROBLEM
Burner does not come on:
Burners produce carbon deposits:
Pan difficult to tilt:
LOOK FOR:
Gas supply to unit is "OFF"
Manual shut off valve is "OFF".
Thermostat is not turned "ON"
Pan not in lowest position.
Ignition control not functioning.
Unit electrical supply is not plugged in or turned on.
Wrong size orifices.
Burner air not adjusted properly.
Wrong gas supply.
Incorrect pressure at supply.
Unit not level.
Trunnion housing requires grease.
Thrust bearing too tight.
Segment gear worn.
Worm gear worn.
16