Cleaning; Maintenance - Blodgett BLT-30G Installation Operation & Maintenance

4.0 CLEANING

WARNING: Disconnect the power supply to the appliance before cleaning
or servicing.
WARNING: The appliance and its parts are hot. Use care when operating,
cleaning and servicing the kettle.
The gas fired tilting skillet should be cleaned after each use.
1. Keep exposed cleanable areas of unit clean at all times.
2. Thoroughly wash pan and lid. If necessary soak pan to remove product that is stuck
to pan surface. Use mild detergent and water.
3. Clean around burner air mixer and orifice if lint has accumulated.
4. Visually assure carry-over ports are unobstructed.
5. Rinse entire unit and dry. Do not get water in electrical box or any electrical
component.

5.0 MAINTENANCE

At least twice a year, have an authorized service person clean and adjust the unit for
maximum performance.
WARNING: At least twice a year, have an authorized service person
inspect and lubricate the tilt mechanism, replacing any worn or damaged
parts.
All units are adjusted at the factory. In case of problems in operation at initial
installation, check type of gas and manifold pressure and compare it with information on
rating plate.
15