Tekmar 519 Quick Setup Manual page 3

7.
Critical Settings
The following settings are essential to the successful operation of the heating system.
• Press and hold down both the
Press
• Release both buttons once the step has been reached.
• Press the
+
• Press and hold down both the
Together
• After 15 seconds of no button activity, the display goes
Display Setting
User settings.
MODE
Select heat or off.
UNITS
Select the temperature units in degree Fahrenheit or Celsius.
BACK LIGHT
Select when the display back light should operate. Options
are Off, Auto, and On. Auto operates the backlight for 30
seconds after a keystroke.
SET FLOOR
Set the floor minimum temperature. Available when an
F
auxiliary floor sensor is connected and the built-in room
temperature sensor is on.
TYPE
Device Type number. Hold the
version.
ESCAPE
Release the
A Watts Water Technologies Company
to change from one step to the next.
or the
available.
seconds to go to the next step, OR
back to normal operation.
and buttons to return to the home screen.
3
and buttons for 3 seconds
button to change the setting, if
and buttons for 3
button to view the software
© 2014 519_Q - 02/14