Reset To Factory Setting; Cautions; Warranty - Baxtran AND200A User Manual

ANF-AND-ANG
Mul•-func•onal balances
4 . 1 3 . R E S E T T O F A C T O R Y S E T T I N G
This function resets all balance settings to factory setting.
In weighing mode, press and hold the
Press the
UNIT/COUNT
Press the key to display current setting.
SET/TARE
Select the desired settings by pressing the
rSt
> Balance will be reset to factory setting
SI
rSt
> Balance keeps its individual setting
no
Press the key to confirm selection. The balance returns to weighing mode.
SET/TARE
5 . C A U T I O N S
> The balance is not a water proof unit. Splash of water into the scale may cause permanent damage
to balance.
> Do not over load the balance which may cause permanent damage of the sensor
> Always use the balance with care since this is a very precision device.
> Do not use balance for dynamic weighing. In the event that small quantities are removed or added
to the material to be weighted, incorrect weighting results can be displayed due to the "stability
compensation" in the balance.
> Do not leave permanent load on the weighing plate. This may damage the measuring system.
> Never operate balance in explosive environment. The version is not explosion protected.
> The structure of the balance may not be modified. This may lead to incorrect weighing results, safety-
related faults and destruction of the balance.
6 . W A R R A N T Y
This scale is warranted against defects of manufacturing and materials for a period of 1 year, from the
delivery date.
During this period, GIROPÈS SL will take charge of repairing the scale.
This warranty does not cover defects or damaged caused by misuse, overloading or improper installation
contrary to the recommendations described in this manual.
This warranty does not cover shipping costs for the reparation of the balance.
User's guide
FUNCTION
key or key several times until
HOLD/PRINT
UNIT/COUNT
UNIT
key until appears.
rSt
is displayed.
key or HOLD/PRINT.
ENG FR ES
29