Installing The Receipt Roll; Connecting The Terminal To The Pos - Westpac EFTPOS CONNECT Quick Reference Manual

Installing the receipt roll.

• Open the paper compartment
by lifting the catch located at the rear
of the terminal and pull the cover
to the rear of the terminal.
• Insert a new receipt roll into
the paper compartment.
• Pull the paper past the top
of the terminal. Hold the paper
and close the paper compartment.
• Press both upper corners
of the paper compartment cover
until it clips into position.
• Press the Paper feed button on
the terminal to ensure the paper
has been loaded correctly and feeds
through the roller smoothly.
Note: The EFTPOS Connect terminal comes with a
4G SIM card inserted in the SIM1 Slot.

Connecting the terminal to the POS.

USB
• Connect the USB cable provided
between USB-B (Slave) on
the terminal base and USB port
on the POS as shown here.
Connect
Serial/RS232
•
COM0
Connect
to POS
Lift catch up
Pull cover open
Correct paper
position
Connect the Serial/RS232 cable provided
between the COM0 slot on the terminal base
and serial port on the POS as shown here.
SIM1
Connect
to POS
5