Door Panel - Sub-Zero Designer Series Installation Manual

Door Panel

Stainless Steel Panel
Stainless steel door panels are available through an autho-
rized Sub-Zero dealer. For local dealer information, visit the
find a showroom section of our website, subzero.com.
Minimum 1/8" reveals are required.
(3)
10 | Sub-Zero Customer Care 800.222.7820
Custom Panel
A custom door panel and handle hardware must be
installed.
A 5/8" minimum to 3/4"
(16) (19)
required. The panel cannot exceed the maximum panel
weight indicated in the chart below. The depth of each
model is 23 1/8" . Allow for panel thickness when plan-
(587)
ning the finished opening depth.
Minimum 1/8" reveals are required.
(3)
PANEL WEIGHT
24" Model
15" Model
Finish all sides of the custom panel. They will be visible
when the door is open.
A D-style handle is recommended. Locate the door handle
near the edge of the panel opposite the hinge and cen-
tered top to bottom. Stainless steel tubular and pro handles
are avail able through an authorized Sub-Zero dealer. For
local dealer information, visit the find a showroom section
of our website, subzero.com.
maximum thick panel is
MAX
22 lb
(10 kg)
15 lb
(7 kg)