Blaupunkt RNS149 Operating Instructions Manual page 80

Set-up/Basic settings
Follow the instructions given to you by the system and
Press OK 8.
You can cancel the process at any time. If you want to end the installation,
Use << >> on the rocker switch 7 to select CANCEL and
Press OK 8.
The previous menu item in the installation will appear.
Following the system test the system will perform the actual calibration. To do
so, you must drive a distance of 8 to 10 miles with good GPS reception.
First select the option you require, NEW INSTALL or TYRE CHANGE.
Press OK 8.
Before the process begins, you will be prompted to confirm the deletion of any
old calibration information.
Note: If you select NEW INSTALL , route guidance is not possible
during the first 25% of the calibration process.
The distance you will be required to drive depends on a number of
different factors such as the quality of GPS reception and the route.
The number of miles given is only a guideline. The distance can be
much shorter or much longer if conditions are unfavorable.
Set-up menu Install
80