Equipment Illustration - Blaupunkt RNS149 Operating Instructions Manual

Equipment illustration

1
Open button, access to CD-Rom drive.
2
ON button.
3
Rotary volume control.
4
Hotkey, programmable function key. Refer to the section on "Pro-
gramming the hotkey" in the chapter on "Set-up"
5
Dot-matrix display for general oper ation.
6
Info key. During route guidance press the Info key to have the last
voice output for navigation repeated and the active destination dis-
played. List entries marked by ... will be displayed in full length.
7
Rocker switch. The functions performed by the rocker switch depend
on the menus or operating modes which are currently active.
8
OK, input/confirmation key.
9
ESC, quits menus without saving any changes made.
:
AUD, activates the Audio menu.
;
DSC, Direct-Software-Control key activates the DSC menu.
<
Softkeys 4 to 6. The functions performed by the softkeys depend on
the contents of the menus on the control display.
=
Softkeys 1 to 3. The functions performed by the softkeys depend on
the contents of the menus on the control display.
>
NAV, activates navigation functions.
?
CD.C, activates the CD-player or CD-changer operating mode.
@
TU, switches to the radio operating mode.
ENGLISH FRANÇAIS ESPAÑOL
3