Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro Greensmaster e1021 Operator's Manual

Specifications

Width
Dry weight*
Width of cut
Dependent on traction-drum position [refer to
Height of cut Adjusting the Traction-Drum Position (page
14)] and use of High Height-of-Cut Kit..
Dependent on reel speed and reel-drive-pulley
Clip position; refer to
Mowing
3.2 km/h (2 mph) to 5.6 km/h (3.5 mph)
speed
Transport
speed
*Traction unit only. Refer to the cutting unit Operator's
Manual for the weight of each cutting unit.
Electrical Specifications
Voltage
Current
Amp Hours
IP Rating

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Model 04831
91 cm (36 inches)
80.5 kg (177 lb)
53 cm (21 inches)
Adjusting the Clip
Rate (page 14).
8.5 km/h (5.3 mph)
48 V
DC ( )
25.6 AH
IP65
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Shut off the machine, remove the key (if equipped),
and wait for all movement to stop before you leave
the operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the
machine quickly.
•
Check that operator-presence controls, safety
switches, and safety protective devices are
attached and functioning properly. Do not operate
the machine unless they are functioning properly.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Performing Daily
Maintenance
Perform the daily maintenance procedures; refer to
Daily Maintenance Checklist (page
13
27).