Shift Value - Hitachi MULTIZONE RAM-40NE2F Technical Catalogue

10.1.1 SHIFT VALUE

1. Press and hold
the RESET button until remote controller now enter 'Shift value change mode'.
2. Press (ON/OFF) button so that the display indicates
3. Select (FAN SPEED) button to choose Heating Shift or Cooling Shift Mode.
By setting fan speed to HIGH
By setting fan speed to LOW
4. Press (ROOM TEMPERATURE) button to change the shift value (-3°C ~ 0 ~ 3°C).
5. Press (ON/OFF) button to end 'Shift value setting mode'.
NOTE:
1. There are total of 7 shift values ranging from -3 to 3.
2. The changed shift value will remain unchanged after turned off the power.
(ON/OFF) button and (ON TIMER) button at the same time while giving a single press on
or MED , it will go to Cooling Shift mode.
or SILENT , it will go to Heating Shift mode.
Error! Reference source not found.
(FAN) speed.
10-3