Fig. 32 - Operations Screen - York YT Millennium Operating & Maintenance

With optiview control center for electro-mechanical starter,solid state starter and variable speed drive
Table of Contents

Advertisement

OptiView Control Center
FIG. 32
OVERVIEW
This screen allows definition of general parameters hav-
ing to do with the operation of the chiller.
DISPLAY ONLY
Chiller Run Time
(Flash memory Card version C.MLM.02.01 or later)
Displays the amount of time the chiller has been running
since the last start signal was received. Value is reset to
zero when the chiller enters Coastdown. It remains at
zero while shutdown and during "System Prelube".
PROGRAMMABLE
Control Source
Access Level Required: OPERATOR
Define whether the control of the chiller will be Local,
Digital Remote, Analog Remote, Modem Remote or
ISN Remote.
Number of Starts
Access Level Required: ADMIN
Displays the number of the starts the chiller has initiated.
This may be reprogrammed to a desired value, (generally
when this value has been reset due to a Microboard re-
placement), but should not be done so arbitrarily.
74
OPERATIONS SCREEN
Operating Hours
Access Level Required: ADMIN
Displays the total accumulated run time of the chiller.
This may be reprogrammed to a desired value (generally
when this value has been reset due to a Microboard re-
placement), but should not be done so arbitrarily.
Hot Gas Bypass (Enabled/Disabled)
Access level required: SERVICE
Enables and disables the hot gas bypass feature.
Refrigerant Level Control (Enabled/Disabled)
Access Level Required: SERVICE
Enables and Disables the Refrigerant Level Control
feature.
Service Phone Numbers
(Flash Memory Card version C.MLM.02.02.xxx
and later)
Access Level Required: SERVICE
Displays up to two service phone numbers. The Regional
service phone number is displayed as the first number.
Although the label and number can be changed appro-
priately, the default for this entry is "York Intl North
American Toll Free Number 1-800-861-1001". The
Local service phone number is displayed as the second
number. Although blank by default, the appropriate label
and number can be entered by a Service Technician.
FORM 160.55-O1 (920)
00479VIP
YORK INTERNATIONAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

R-123

Table of Contents