Control Play; Adjust Volume; Usb Playability Information; Supported Mp3 Formats - Philips 3000 Series User Manual

Party speaker
Hide thumbs Also See for 3000 Series:
Table of Contents

Advertisement

Control play

In USB mode, follow the instructions below to
control play.
Button
Action
Press to skip to the previous or
next track.
Increase/decrease volume.
Press to pause or resume play.

Adjust volume

During play, press +/- button on the party speaker
to increase or decrease volume.
The green speaker light will change accordingly
to indicate the volume adjustment.

USB playability information

Compatible USB devices:
USB ash memory (USB 2.0 )
USB ash players (USB 2.0)
Memory cards (requires an additional
card reader to work with this unit)
Supported formats:
USB or memory le format: FAT16, FAT
32, exFAT (sector size: 512 bytes )
Audio format: MP3, WAV, WMA, FLAC.
Directory nesting up to a maximum of
8 levels
Max support 128G USB

Supported MP3 formats

Maximum No. of titles: 999 (depending on
le name length)
Maximum No. of albums: 64
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
Supported bit-rates: 32-384 (kbps)
variable bit rates
7
Play audio through
Line in

Listen to an external device

With this product, you can listen to an external
audio device such as an MP3 player.

Play from an MP3 player

1 Press and hold
to switch on the party speaker and then you
will hear a prompt tone.
2 Connect an audio input cable (not supplied)
with a 3.5mm connector on both ends to:
The Line in jack on the product.
The headphone jack on the MP3 player.
3 The blue backlight
and the party speaker will be automatically
switched to Line in source.
4 Play audio on the MP3 player (refer to its
user manual).
Note
You need to re-insert the audio input cable
into the Line in jack if you want to switch back
to Line in from the other sources.

Line out

This unit has a Line out jack. You can output the
analog stereo audio signals to external devices
such as an active speaker. Connect an audio
cable (not supplied) to the Line out jack on the
top panel of the unit and the line in jack of the
external device, and the unit will output audio
automatically to the external device.
button for 3 seconds
button will go o
Line in

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tax3206

Table of Contents