Disconnect A Device; Play Audio Through Usb; Play From A Usb Storage Device - Philips 3000 Series User Manual

3 Select [Philips TAX3206]
displayed on your device for pairing.
After successful connection, the blue
backlight of the

Disconnect a device

1
Press & hold button on the party speaker
for 3 seconds to disconnect from the current
device.
2 Blue backlight of
light blink to remind you to connect with a
Bluetooth device.
Note
Before connecting another Bluetooth device,
disconnect the current device rstly.
When the Bluetooth device is beyond the
valid Bluetooth distance, the unit will
disconnect automatically from the device.
Press & hold button on the unit for 8
seconds to disconnect the current device and
clear out the Bluetooth pairing information.
button keeps solid.
button and blue speaker
6

Play audio through USB

Play from a USB storage
device
Note
Make sure that the USB device contains
playable audio contents in supported formats.
Supported formats: MP3, WAV, WMA, FLAC.
FLAC format audio only supports not over 16
bit rate and 1M code rate.
The unit supports max 128G USB and le
format FAT16/FAT32/exFAT.
If the USB device is not recognized and
unreadable or the audio content in the USB is
unplayable, the party speaker will be
automatically switched to Bluetooth source.
1 Press and hold
switch on the party speaker and then you will
hear a prompt tone.
2 Insert the USB plug of the device into the
USB slot.
3 The blue backlight of
and the party speaker will automatically
be switched to USB source.
4 Playback song automatically.
Note
You need to re-insert the USB plug into the
slot if you want to switch back to USB from
the other sources.
button for 3 seconds to
button will go o ,