Switch to single mode
A Press GROUP on the master to enter
single mode.
» The slaves keep looking for the master
until timeout in 15 minutes.
» You can create a new group with the
slaves or press GROUP on a slave to
enter single mode.
•
Press GROUP on the master again to
resume group mode.
B Press GROUP on a slave to switch to
single mode.
» The GROUP indicator on the speaker
turns off, and the
blue.
Press GROUP again to rejoin a group.
•
» The GROUP indicator lights up again
and the
indicator turns off.
Control play
Note
•
Due to data buffering, you may experience some
delay when you play/pause or adjust volume from the
Bluetooth device.
EN
12
indicator flashes
Control from the speaker
• In single mode, turn the
speaker on/off.
• In group mode, turn the
whole group of speakers on/
off.
• In single mode, pause/resume
(unavailable
play of the current speaker.
in AUDIO
• In group mode, pause/
IN mode)
resume play of the whole
group.
Volume
• Press to mute/unmute the
knob
current speaker.
» The volume indicator
• Turn clockwise/anticlockwise
to increase/decrease volume
of the current speaker.
Control from the connected Bluetooth device
You can use controls on your
Bluetooth device directly.
flashes when the speaker
is muted.