Status Indicators - Agilent Technologies InfinityLab LC Series User Manual
Preparative open-bed fraction collector
Hide thumbs
Also See for InfinityLab LC Series:
- User manual (369 pages) ,
- Quick manual (82 pages) ,
- Installation manual (12 pages)
Table of Contents
Advertisement
3
Using the Fraction Collector
Status Indicators
Status Indicators
1
The module status indicator indicates one of six possible module conditions:
Status indicators
1. Idle
2. Run mode
3. Not-ready. Waiting for a specific pre-run condition to be reached or completed.
4. Error mode - interrupts the analysis and requires attention (for example a leak or defective internal components).
5. Resident mode (blinking) - for example during update of main firmware.
6. Bootloader mode (fast blinking). Try to re-boot the module or try a cold-start. Then try a firmware update.
1290 Infinity II Preparative Open-Bed Fraction Collector User Manual
37
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Chapters
Table of Contents
