Safety Rules; Functional Description; Operation - Bosch AL 1404 Operating Instructions Manual

Safety Rules

Connect battery chargers that are used in the
open via a ground fault circuit breaker.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
Do not charge other batteries. The battery
charger is suitable only for charging Bosch
NiCd/NiMH batteries with the voltages listed in the
technical data. Otherwise there is danger of fire and
explosion.
Keep the battery charger clean. Contamination
can lead to danger of an electric shock.
Before each use, check the battery charger,
cable and plug. If damage is detected, do not
use the battery charger. Never open the bat-
tery charger yourself. Have repairs performed
only by a qualified technician and only using
original spare parts. Damaged battery chargers,
cables and plugs increase the risk of an electric
shock.
Technical Data
Battery Charger
Article number
Output voltage (automatic voltage detection)
Charging current
Allowable charging temperature range
Charging time for battery capacity
– 1.2 Ah
– 1.5 Ah
– 2.0 Ah
Weight according to EPTA-Procedure 01/2003
Protection class
Please observe the article number on the type plate of your battery charger. The trade names of individual battery chargers may
vary.

Operation

Starting Operation
Observe the mains voltage! The voltage of the
power supply must correspond with the data given
on the nameplate of the battery charger. Battery
chargers marked with 230 V can also be operated
with 220 V.
2 609 140 298 • 12.4.06
Do not operate the battery charger on easily
inflammable surfaces (e. g., paper, textiles,
etc.) or surroundings. The heating of the battery
charger during the charging process can pose a fire
hazard.

Functional Description

Product Features
The numbering of the product features refers to the
illustration of the battery charger on the graphics page.
1 Battery with contact APT*
2 Charging compartment
3 Battery charge indicator
*The accessories illustrated or described are not
included as standard delivery.
V=
mA
°C
h
h
h
kg
Charging Procedure
The charging procedure starts as soon as the mains
plug of the battery charger is plugged into the socket
outlet and the battery 1 is inserted into the charging
compartment 2.
The battery charge indicator 3 is not a charge-control
indicator. The lit indicator signalises the flow of charg-
ing current.
The charging procedure is not ended automatically.
Therefore, disconnect the battery charger from the
mains supply after the battery has been charged and
remove the battery. A temperature increase of the bat-
tery indicates that the battery is fully charged.
English–1
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save these instructions.
AL 1404
2 607 225 0..
7.2–14.4
400
0–45
3
4
5
0.4
/ II
AL 2404
2 607 225 1..
7.2–24
400
0–45
3
4
5
0.6
/ II