Table of Contents
Advertisement
Nuvation Energy High-Voltage BMS - Product Manual
4.3. Cell Interface Mechanical Installation
4.3.1. Dimensions and Weight
The overall dimensions of the Cell Interface are 104.4 mm × 121.58 mm × 40.6 mm.
The standard Cell Interface (i.e. with bulkhead) weighs approximately 450 g.
Figure 20. Mechanical Drawing of Cell Interface with Bulkhead Enclosure
4.3.1.1. DIN rail mounting Kit
For applications requiring DIN rail mounting, the Cell Interface Mounting Bracket (Bulkhead-to-DIN)
(sold separately) may be used. This kit includes a metal plate and the necessary hardware to securely
mount the bulkhead enclosure of the Cell Interface to EN50022-compliant DIN rails.
The Mounting Bracket kit assembly adds an extra 14.2 mm to the overall width of the Cell Interface
module, bringing it from 104.4 mm to 118.6 mm. The kit assembly holds the module approximately 7
mm away from the inside lip of the DIN rail.
The Mounting Bracket offsets the Cell Interface module from the center of the DIN rail approximately
30 mm upwards as shown in
Figure
21.
A Cell Interface with the Mounting Bracket weighs approximately 540 g.
Document ID: NE-PM-003
25
Rev 1.2, 2021-03-03
Curie Update 1
Advertisement
Table of Contents
