Table of Contents
Advertisement
Quick Links
Installation Quick Guide
u Space Outdoor R1 Series LoRa Gateway installation.
This gateway is designed for outdoor pole mounting installation.
Contents of delivery
1
2
Preparing the Installation
Connectors and Interfaces
3
Installation
Install GPS Antenna
Install Rear Bracket to Gateway
Pole Mounting
Install Surge Protection Cable
Install 8 dBi LoRa Antenna to Pole
Install 11-57 VDC Port Cable
Install SIM Card
540.01511.015
Outdoor LoRa Gateway
This is a quick reference guide for
4
Optional Accessories Recommended
5
Cabling
6
Network Access
All product speci cations are subject to change without notice
Advertisement
Table of Contents
Related Manuals for UfiSpace Outdoor R1 Series
Summary of Contents for UfiSpace Outdoor R1 Series
- Page 1 Outdoor LoRa Gateway Installation Quick Guide This is a quick reference guide for u Space Outdoor R1 Series LoRa Gateway installation. This gateway is designed for outdoor pole mounting installation. Contents of delivery Optional Accessories Recommended Preparing the Installation Cabling...
-
Page 2: Contents Of Delivery
This Outdoor LoRa Gateway is designed with Semtech Technology to provide low power and wide area (LPWA) unlicensed band wireless connection. This gateway supports connectivity for wide range of Internet of Things (IOT) applications. 1 Contents of Delivery Items x Outdoor LoRa Gateway with water protection cap on N-Type connector ports Metal Caps: V2.1 HW (3 for LTE version, 2 for non-LTE version) x Outdoor LoRa Gateway User Manual and Installation Quick Guide x LTE 0 dBi Antenna (only for model with LTE function) -
Page 3: Preparing The Installation
2 Preparing the Installation Connectors and Interfaces V2.1 R1 Series Gateway LoRa Antenna 1 GPS Antenna LoRa Antenna 2 LTE Antenna Pressure Vent 11-57 VDC IN SIM Card 48 VDC-IN/ PoE USB/ LED/ Reset Caution Must make sure all antennas are installed properly before apply PoE power to the gateway. For un-connected N-Type Antenna Port, MUST install a "... -
Page 4: Installation
3 Installation Install GPS Antenna The GPS Antenna can be installed to top of gateway housing directly and can be remove from pole together with gateway. Install Rear Bracket to Gateway Install the Rear Bracket to Outdoor Gateway housing with 4 screws. V2.1 Gateway All product speci cations are subject to change without notice - 4 -... -
Page 5: Pole Mounting
Pole Mounting Our mounting bracket is designed for pole mount only. V2.1 Gateway RF Feeder Cable Surge Protector (optional) GPS Antenna (recommended position) Gateway LTE Antenna 11-57VDC Surge Protector (optional) PoE Cable (Must use shielded Ethernet cable) PoE Adapter All product speci cations are subject to change without notice - 5 -... - Page 6 Vertical Mount Install Hose Clamp to Pole Hose Clamp Minimum OD 40 mm Maximum OD 120 mm Maximum 55Kg.cm torque for hose clamp Hook Gateway onto the Pole Bracket IMPORTANT After hooking gateway onto the pole bracket, these 2 screws must be installed to secure gateway’s vertical direction.
- Page 7 Install Surge Protection Cable Surge Protection Cable must be properly connected to gateway’s Pole Bracket and earth ground. Surge Protection Cable is installed at Pole Bracket. Earth Ground Install Coaxial Surge Protector to LoRa, LTE & GPS RF Ports Recommend to add external RF coaxial Surge Protector to enhance protection level and must be connected to the Lighting Protection System, lighting rod to earth ground.
- Page 8 Install 11-57 VDC Port Cable Install + & - DC wires to the green color DC Input Connector provided in the box before inserting it to gateway’s 11-57 VDC port. DC Input Connector DC Input Cable Gland Install SIM Card Must insert SIM card at correct direction as shown in the SIM card port mylar.
- Page 9 5 Cabling LoRa Antenna #1 LoRa Antenna #2 (optional) GPS Antenna 5 VDC output for supporting 5 V A c t i v e LTE Antenna GPS Antenna PoE Adapter (must use shielded Ethernet cable) 11-57 VDC V2.1 Gateway All product speci cations are subject to change without notice - 9 -...
-
Page 10: Network Access
Caution Must make sure all antennas are installed properly before apply PoE power to the gateway. For un-connected N-Type Antenna Port, MUST install a " N-Type Water Protection Cap" to prevent water leaking into the device. " N-Type Water Protection Caps" are supplied with the gateway. - Page 11 Changing Con guration If default con guration does not t the usage in installation environment, please use setup showed in following photo to change con guration. You will need a Router that have DHCP server to o er IP to Outdoor LoRa Gateway, or use a switch/ hub and running a DHCP server on PC for the same purpose.
- Page 12 WAN Page This page describes the backhaul con guration. There are three kinds of backhaul which are Ethernet over PoE, WiFi client mode and LTE (if both LTE module and SIM card are installed) and can be selected and con gured through their own settings. Unsafe WARNING : HOT SURFACE DO NOT TOUCH !!
-
Page 13: Federal Communication Commission Interference Statement
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 14: Professional Installation Instruction
Professional installation instruction Please be advised that due to the unique function supplied by this product, the device is intended for use with our interactive entertainment software and licensed third-party only. The product will be distributed through controlled distribution channel and installed by trained professional and will not be sold directly to the general public through retail store.
Need help?
Do you have a question about the Outdoor R1 Series and is the answer not in the manual?
Questions and answers