Special Setting Mode - Omron E8F2 Manual

E8F2
Teaching Error
•
Present value not
within set range
OUT1 OUT2 kPa Torr Psi
Meaning of display: er.t (Error teach)
If the present value or the result of calculation after teaching is not within the range, the SET key input will not be accepted. In this case
an error will be displayed for 1 s if teaching is performed.

Special Setting Mode

Key-protect, hysteresis width, window width, display refresh interval, number of measurement times for averaging, and bar indicator
range settings are set in special setting mode.
Measurement
mode
Hysteresis width
key-protect
OUT1 OUT2 kPa Torr Psi OUT1 OUT2
1. Press the SET key and Up key simultaneously to set the E8F2 to special setting mode and display prt.
2. Set the Up or Down key to select the items prt, hys, wid, dsp, aUe, and bar.
Key-protect Setting
OUT1 OUT2 kPa Torr Psi
or
Key-protect Status
0: No Key-Protect.
1: No basic or pressure settings are accepted.
2: No input is accepted other than for checking the pressure value or special settings or setting to energy-saving mode.
1. Press the SET key while prt is displayed to display the key-protect value presently set.
2. Press the Up or Down key to change the value.
3. Press the SET key to select the displayed value and display prt again.
4. Press the Up and Down keys simultaneously display prt again without selecting the value.
Error display for 1 s
OUT1 OUT2 kPa Torr Psi
Setting item
OUT1 OUT2 kPa Torr Psi
Window width
kPa Torr Psi OUT1 OUT2 kPa Torr Psi
No key-protect
OUT1 OUT2 kPa Torr Psi
Press the Up or Down key to
change the set value.
Setting item
Number of measurement
Display refresh interval
times for averaging
OUT1 OUT2 kPa Torr Psi
OUT1 OUT2 kPa Torr Psi
16
E8F2
Bar indicator range
OUT1 OUT2 kPa Torr Psi