After Finishing Work; Transporting; Transporting The Brushcutter; Transporting The Battery - Stihl FSA 86 R Instruction Manual

13 After Finishing Work

► If the mowing lines (2) cannot be pulled out to the required
length: Replace the spool (1) or the mowing lines (2).
The spool is empty.
13 After Finishing Work
13.1 After Finishing Work
► Switch off the trimmer and remove the battery.
► If the trimmer is wet: Allow the trimmer to dry.
► If the battery is wet: Allow the battery to dry.
► Clean the trimmer.
► Clean the deflector.
► Clean the cutting attachment.
► Clean the battery.

14 Transporting

14.1 Transporting the brushcutter

► Switch off the brushcutter and remove the battery.
Carrying the Brushcutter
► Carry the brushcutter in one hand properly balanced by
the shaft, with the cutting attachment behind you.
Transporting the brushcutter in the car
► Secure the brushcutter to prevent turnover and
movement.

14.2 Transporting the Battery

► Switch off the trimmer and remove the battery.
► Make sure the battery is in a safe condition.
► Observe the following points when packing the battery:
– The packaging must be non-conductive.
– Make sure the battery cannot shift inside the packaging.
0458-833-9621-A
► Secure the packaging so that it cannot move.
The battery is subject to the requirements for the transport
of dangerous goods. The battery is classified as UN 3480
(lithium-ion batteries) and has been tested in accordance
with UN Manual of Tests and Criteria, Part III, sub-section
38.3.
For transport regulations see www.stihl.com/safety-data-
sheets

15 Storing

15.1 Storing the Trimmer

► Switch off the trimmer and remove the battery.
► Remove the spool.
► Observe the following points when storing the trimmer:
– The trimmer is out of the reach of children.
– The trimmer is clean and dry.

15.2 Storing the Battery

STIHL recommends that you store the battery with a charge
between 40 % and 60 % (2 LEDs glow green).
► Observe the following points when storing the battery:
– Battery is out of the reach of children.
– Battery is clean and dry.
– Battery is in an enclosed space.
– Store the battery separately from the trimmer and
charger.
– Battery is in non-conductive packaging.
– Battery is in a temperature range between -10°C and
+50°C.
English
41