Adjusting Trimmer For User; Adjusting And Setting The Loop Handle; Removing And Fitting The Battery; Inserting The Battery - Stihl FSA 86 R Instruction Manual

English
► Hold the fanwheel (4) with your hand.
► Manually rotate the mowing head (1) clockwise and
tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Hold the fanwheel with your hand.
► Unscrew the mowing head counterclockwise.
► Remove the thrust plate.

8 Adjusting Trimmer for User

8.1

Adjusting and Setting the Loop Handle

The loop handle can be set to different positions to suit the
height and reach of the user.
► Switch off the brushcutter and remove the battery.
a
3
► Undo the screws (2).
► Move the loop handle (1) to the required position and
check that the following conditions are met:
– The bump guard (3) fits between the loop handle (1)
and the control handle.
– a = no more than 30 cm.
► Tighten down the screws (2) so that the loop handle (1)
cannot be rotated on the shaft.
38

9 Removing and Fitting the Battery

9.1

Inserting the battery

► Insert the battery (1) up to the limit stop into the battery
compartment (2).
The battery (1) engages with a click and is now locked.
9.2

Removing the Battery

1
► Set the brushcutter on a level surface.
► Keep one hand in front of the battery compartment so that
the battery (2) cannot fall out.
2
► Press both locking levers (1).
The battery (2) is released and can be removed.
8 Adjusting Trimmer for User
1
2
1
1
2
0458-833-9621-A