Mounting And Removing The Mowing Head - Stihl FSA 86 R Instruction Manual

7 Assembling the Trimmer
► Fit and tighten down the nuts (7) firmly.
7.4

Mounting and Removing the Mowing Head

7.4.1 AutoCut C 6-2 mowing head
Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
1
2
► Position the mowing head (1) on the shaft (2).
► Hold the mowing head (1) with your hand.
► Manually rotate the cap (3) clockwise and tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Hold the mowing head with your hand.
► Manually rotate the cap counterclockwise until the mowing
head can be removed.
7.4.2 PolyCut 6-2 mowing head
Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
0458-833-9621-A
3
1
1
2
► Position the mowing head (1) on the shaft (2).
► Hold the mowing head (1) with your hand.
► Manually rotate the upper part (3) clockwise and tighten it.
Removing the Mowing Head
► Switch off the brushcutter and remove the battery.
► Hold the mowing head with your hand.
► Manually rotate the upper part counterclockwise until the
mowing head can be removed.
7.4.3 DuroCut 5-2 mowing head:
Mounting the Mowing Head
► Switch off the brushcutter and remove the battery.
1
2
3
► Place the thrust plate (2) on the shaft (3) so that its smaller
diameter faces up.
► Position the mowing head (1) on the shaft (3).
English
3
1
1
4
37